THS1-25-10PW7R12-J/M - Combined marking tool with 1 type holder and 7 pressure / date marking wheels

Product info

Dimensions [mm]:	105x44x80
Weight [kg]:	1,6
Components:	Marking wheels for pressure and date marking. Start-up aid one-sided.
Note:	The marking stamps "ET19.." for the company name marking must be ordered additionally. The corresponding 10-digit type holder must be completely filled, if necessary with blank stamps "DIST19-..". In addition, a further start-up aid "2TH48-ALH" (optional) must be installed. The mounting bar for clamping this marking tool in the marking machine has a cross-section of 20x20mm and a length of approx. 85mm.

Benefit

The pressure and date marking is done with the marking wheels included in the scope of delivery
Setting/changing these values can thus be done quickly and conveniently

Practical tip

Calculation of the usable presucceeding of a version: Outside Ø x pi.
The total marking length of this marking tool is maximum 57,5mm if there are 10 marking stamps "ET19..." and no blank stamp in the company name type holder.

Reserve technical changes.

Recommended accessories:

2TH48-ALH

Marking stamp for marking tools of the marking machines

ET19-0

ET19-1

ET19-2

ET19-3

ET19-4

ET19-5

ET19-6

ET19-7

ET19-8

ET19-9

ET19A

ET19B

ET19C

ET19D