TEF2H06 - PTFE hose with a thick, smooth inner inner layer TEF2H

Product info

DN:	06
Size:	04
Inch:	1/4
Outer Ø [mm]:	10,2
bending radius [mm]:	76
working pressure [bar]:	172
burst pressure [bar]:	690
Safety factor:	4:1
Standard ferrule:	XV04P3W
Weight [kg]:	0,128
Color inner tube:	white
Inner tube:	Smooth, seamless extruded tube of PTFE
MSHA-Approval:	no
Media:	media compatibility on request
Note:	Working pressure is related to temperature. Please use pressure-temperature-curve to calculate allowed working pressure according to your application
Reinforcement:	1 stainless steel wire braid (AISI 304 / 1.4301)
Temperature range [°C]:	- 60 ° C to + 260 ° C; Resistance on request (technik@indunorm.de)
application:	Highly flexible delivery hose for applications in hydraulics and the use of aggressive and hot or cold liquids
max operating temperature [°C]:	+260
number of layers:	1

Benefit

Due to the greater wall thickness of the PTFE inner layer compared to TEF1H: Better kink resistance, higher operating pressures, longer service life when used with abrasive media.

Practical tip

When using our special ferrules the usual masking of the dividing line with fabric tape can be dispensed. However, the ends should be secured during storage so that damage to the inner layer is prevented. By this method no danger to personnel is obtained.